|
HLSM (Linear Translators) Series |
The HLSM Z
shifts differs from the standard LSM series in that it incorporates clear bolt
holes on the fixed mounting flange. This enables the device to be
mounted to tapped flanges, such as on a gate valve. The series is
also available with a variety of flange, stroke and actuation options. |
|
| Actuation methods |
The
series can be actuated via a manual handwheel, DC motor or stepper motor
(click here to view actuation options).
Each HLSM can now be supplied with the new
digital linear scale, offering visual position indication with 10 mm
resolution. Click
here for further information. UHV Design also offer
motor control solutions including the handheld
DC motor controller and the programmable
stepper motor control centre. |
|
|
|
HLSM Specifications |
| Series |
Flange type |
Clear bore
(mm) |
Maximum
bakeout |
Standard
stroke (mm) |
Actuation options
(see key below) |
| Key |
Flange size |
| HLSM |
60 |
CF64 (4.5" OD) |
60 |
250ºC |
25,
50, 100, 150,
200 |
H, GH,
SD, SS |
| 64 |
65 |
| 100 |
CF100 (6" OD) |
102 |
| 150 |
CF150 (8" OD) |
149 |
|
|
|
| Part Number
Configuration |
|
Actuation method key |
| Linear
Shift Mechanism part numbers are broken into four sections, as shown
below: - |
|
Key |
Actuation
Method |
|
H |
Manual
handwheel |
| Series |
Flange |
Stroke
in mm |
Actuation
method |
|
GH |
Geared
handwheel, 5:1 ratio |
| For
example, an LSM64-200-H would select the LSM series, with CF64 flanges,
200mm travel and manual handwheel actuation.
For the Digital Linear Scale addition add
DLA to the end of the part number.
|
|
SD |
Side-mounted
24V DC motor |
|
SS |
Side-mounted
stepper motor |
|
|
|
|
| Click
here to view dimensional drawings Return
to main section |
|
