UHV Twitter

MD16 / MD19 (CF16, 1.33"OD)

 

  • True UHV rotation
  • High torque to size ratio
  • No bellows or dynamic seals
  • Bakeable to 250°C
  • Zero-backlash under low load

The MD16 is the ‘work horse’ of the MagiDrive series. The standard drive provides sufficient torque for the majority of miniature feedthrough requirements. The MD19 variant maintains the same dimensions as the MD16 but provides increased levels of torque.

MagiDrive body MD16 MD19
System mounting flange CF16 34 mm (1.33” OD)
Construction Machined from one piece 316L
Shaft style Stub shaft with tapped hole
Break-away torque 0.45 Nm (0.33 lbf ft) 0.56 Nm (0.41 lbf ft)
Maximum no load spin speed (standard bearings) 1000 rpm
Maximum shaft axial thrust 20 N
Bakeout 250°C

 

Product code selector
To generate the part number for a MagiDrive Rotary Drives, select a code from each of the following criteria:
Actuation options Shaft options Bearing options
Manual 000 Standard shaft Z Standard bearing
T Standard thimble 030 30 mm shaft CE Ceramic bearing
TF Standard with friction control M Modular shaft    
BF Brake with friction control        
P Timing pulley        
CF Calibrated thimble with friction control        
K Knurled end cap        
KF Knurled end cap with friction control        
D Dual shaft        
Motorised        
IS In-Line stepper motor        
ISS In-Line stepper motor with switches        
ID In-Line DC motor (Not compatible with SADC controller package)        
Pneumatic        
RA Pneumatic actuator        
RAI

Pneumatic actuator with 2 x reed switches and visual position indicators

        
Technical Data & Additional Images
Torsional Stiffness Graph
Customer Special MD16 photograph
Downloads

JPEG File 3D (eprt) File
(edrawings plugin required)		 DXF File
(log in required)		 STEP File
(log in required)