|
LSMT (Linear Translators with Tilt) Series |
The LSMT
series provides Z motion together with the ability to tilt the
travelling flange. This is typically selected to enable the final
alignment of an instrument or probe. The series is available with a variety of flange, stroke and actuation options. |
|
| Actuation methods |
The
tilt motion takes place via manual adjusters. The main linear
motion can be actuated via a manual handwheel, a pneumatic actuator, a DC motor or stepper motor
(click here
to view actuation options). Each LSMT can now be supplied
with the new digital linear scale,
offering visual position indication with 10 mm
resolution. Click
here for further information. UHV Design also offer
motor control solutions including the handheld
DC motor controller and the programmable
stepper motor control centre. |
|
|
|
LSMT Specifications |
| Series |
Flange type |
Clear bore
(mm) |
Maximum
bakeout |
Standard
stroke (mm) |
Actuation options
(see key below) |
| Key |
Flange size |
| LSMT |
41 |
CF41 (2.75"
OD) |
38 |
250ºC |
50,
100 |
H, P, SD, SS |
| 64 |
CF64 (4.5" OD) |
60 |
H, SD, SS |
|
|
|
| Part Number
Configuration |
|
Actuation method key |
| Linear
Shift Mechanism part numbers are broken into four sections, as shown
below: - |
|
Key |
Actuation
Method |
|
H |
Manual
handwheel |
| Series |
Flange |
Stroke
in mm |
Actuation
method |
|
P |
Pneumatic
Actuator |
| For
example, an LSMT64-100-H would select the LSMT series, with CF64 flanges,
100mm travel and manual handwheel actuation.
For the Digital Linear Scale addition add
DLA to the end of the part number.
|
|
SD |
Side-mounted
24V DC motor |
|
SS |
Side-mounted
stepper motor |
|
|
|
|
|
Click
here to view dimensional drawings Return
to main section |
|
