MD100H Hollow MagiDrive (UHV rotary feedthroughs)

The MD100 and MD100H are the most powerful rotary feedthroughs in the MagiDrive range, providing a break-away torque of 25Nm (18.45lbf).  The MD100H is the hollow version, incorporating a fixed CF35 (2-3/4" OD CF) flange at the rear.  This enables a secondary drive, such as the MD35 to be mounted to it, providing a second axis of independent rotation.  Up to three axis of independent rotation can be achieved by 'stacking' the MD100H, MD35H and MD16 drives, as shown to the right.

Product selection

The MagiDrives are selected using four criteria as illustrated in the product code selector table below.  For further information or to request pricing please contact sales.  

MagiDrive Body MD100H

 
System Mounting Flange 152.4mm OD (6" OD CF)
Rear Flange 70mm OD (2-3/4" OD CF)
Construction Fabrication
Shaft Style Torque Tube
Break-away Torque 25Nm (18.45 lbft)
Maximum no load spin speed (standard bearings) 200rpm
Maximum shaft axial thrust 400N (88 lbf)
Bakeout 250ºC
Product Code Selector

To generate the part number for a MagiDrive, select a code from each of the four criteria as shown below
Drive Actuation Shaft Type Internal Bearings
Manual Options
  MD100H T Standard Thimble

X000

 Spigot Flange Z

Standard Bearings
  P Timing Pulley

SE
 
  Automated Options
  SS Side Mounted Stepper Motor  

 = Base Model
  SD Side Mounted DC Motor  

 = Options Available

I.E. MD100HPX000Z = an MD100H fitted with a timing pulley, spigot flange and standard bearings

Return to Main MagiDrives Page