MD64H Hollow MagiDrive (UHV rotary feedthroughs)

The MD64 and MD64H MagiDrives provide high torque, high stability rotation on a 114mm OD (4-1/2" OD CF) flange.  The MD64H is the hollow version, incorporating a fixed CF35 (2-3/4" OD CF) flange at the rear.  This enables a secondary drive, such as the MD35 to be mounted to it, providing a second axis of independent rotation (see right).  Up to three axis of independent rotation can be achieved by 'stacking' the MD64H, MD35H and MD16 drives
Product selection

The MagiDrives are selected using four criteria as illustrated in the product code selector table below.  Links to dimensional drawings are then included.  For further information or to request pricing please contact sales.  

MagiDrive Body MD64H

 
System Mounting Flange 114mm OD (4-1/2" OD CF)
Rear Flange 70mm OD (2-3/4" OD CF)
Construction Machined from one piece 316L
Shaft Style Torque Tube
Break-away Torque 10Nm (7.38 lbft)
Maximum no load spin speed (standard bearings) 500rpm
Maximum shaft axial thrust 400N (88 lbf)
Bakeout 250ēC
Product Code Selector

To generate the part number for a MagiDrive, select a code from each of the four criteria as shown below
Drive Actuation Shaft Type Internal Bearings
Manual Options
  MD64H T Standard Thimble

X000

 Spigot Flange Z

Standard Bearings
  P Timing Pulley XD Dual Shaft Drive

SE

 SemiDrive
  B Thumbscrew Brake
  C Calibrated Thimble
(1° increments)
 
  Automated Options
  SS Side Mounted Stepper Motor  

 = Base Model
  SD Side Mounted DC Motor  

 = Options Available

I.E. MD64HPX000Z = an MD64H fitted with a timing pulley, spigot flange and standard bearings
Dimensional Drawings
MD64HTX000Z MD64HPX000Z MD64HSSX000Z MD64HSDX000Z

Return to Main MagiDrives Page