MD10 MicroDrives

The MD10 MicroDrive is potentially the smallest and best priced UHV rotary drive on the market.  This miniature drive is made possible with the use of the new CF10 MicroFlange, which has an outside diameter of just 25.4mm. This drive offers sufficient torque for the majority of miniature feedthrough requirements.

Product selection

The MicroDrives are selected using four criteria as illustrated in the product code selector table below.  Links to dimensional drawings are then included.  For further information or to request pricing please contact sales.  

MagiDrive Body MD10
System Mounting Flange 25.4mm OD (1" OD CF)
Construction Machined from one piece 316L
Shaft Style Solid
Break-away Torque 0.18Nm (0.13 lbft)
Maximum no load spin speed (standard bearings) 200rpm
Maximum shaft axial thrust 20N (4.5 lbf)
Bakeout 250ēC
Product Code Selector

To generate the part number for a MagiDrive, select a code from each of the four criteria as shown below
Drive Actuation Shaft Type Internal Bearings
Manual Options
  MD10 T Standard Thimble  

X000

 Stub shaft with flat   Z Standard Bearings
  F Friction Control System
  C Calibrated Thimble 
(5° increments)
  P Timing Pulley
 
  Automated Options
  IS Inline Mounted Stepper Motor
  ID Inline Mounted DC Motor  

 = Base Model
  RA Pneumatic Actuator  

 = Options Available

I.E. MD10PX000Z = an MD10 fitted with a timing pulley, stub shaft and standard bearings

Dimensional Drawings
MD10TX000Z MD10CX000Z MD10PX000Z
MD10ISX000Z MD10IDX000Z MD10RAX000Z

Return to the Micro Products Page