MultiCentre Quotation Request Form
Name
Company
Address
E-mail
Phone
Fax
Application Details
What is your application?
What material are your samples?
What size are your samples?
Will the sample be mounted normal or parallel to the mounting flange?
Normal
Parallel
What is the size and type of your system mounting flange?
Where will the stage be mounted?
On top of the chamber
Side port
On the bottom of the chamber
Other (please specify)
What is the systems ultimate pressure?
What is the systems operating pressure?
Are gases involved in your process?
If so please state partial pressures (PP) before and during.
Are any of the following incompatible with your process? (ie. will they react)
Tantalum
Molybdenum
Stainless Steel
What type of Thermocouple do you require?
Type 'C' (W/Re)
Type 'K' (Cr/Al)
Other (please specify)
Do you wish to heat the samples? If so, to what temperature?
How long will the sample be heated for during a typical cycle?
Do you wish to cool the samples? If so to what temperature?
What is the maximum X motion you require? (mm)
What is the maximum Y motion you require? (mm)
What is the maximum Z motion you require? (mm)
Do you require rotation? Please specify.
Azimuthal
Primary
Do you need to DC bias or electrically isolate the sample? If so to what level?
V
Please indicate the actuation method required for each axis of motion.
X motion
Manual
DC motor
Stepper motor
Y motion
Manual
DC motor
Stepper motor
Z motion
Manual
DC motor
Stepper motor
Azimuthal
Manual
DC motor
Stepper motor
Primary
Manual
DC motor
Stepper motor
Do you need temperature controllers and/or power supplies?
Additional comments or requirements
Return to MultiCentre page
