| Part Number |
Product Description |
| PSMCC_-_ _ _ V |
Case |
19 inch rack mounting, 2U high, 290mm
deep |
| Motor compatibility |
Most of UHV Design's range of stepper
driven productss and others with NEMA 17, 23 and 34 (limited to 3.5A per
phase 42 Volts). |
| Electrical supply |
Factory set for 110 Vac (PSMCC_ -
110V) or 220 Vac (PSMCC_ - 220V), 50 - 6- Hz. |
| Front panel facilities |
Mains ON / OFF, Emergency stop, Start
and Jog lemo style connector. |
| Rear panel facilities |
Interlock 9 pin 'D' connector, Motor
lemo style connector, Output 9 pin 'D' connector, Input 9 pin 'D'
connector, PC 9 pin 'D' interface connector and IEC mains input. |
| Limit switching |
Facility for two mechanical switches |
| Inputs |
3 off spare inputs. Inputs may
be TTL, PLC or mechanical switches. On board power supply for
input switching |
| Outputs |
2 off spare outputs |
| Interlock |
Link connector included |
| Driver |
MOSFET driver: Providing 3.5 Amps per
phase at 42 Volts and microstepping to 50800 steps per revolution. |
| Controller |
Programming platform: Micrsoft Windows
TM based software for easy setup and programming. RS232cable
connects your PC for programming (PC running Windows TM 95, 98, 2000,
ME, NT or XP with a 9 pin serial port). |
| PSMCC-RJ |
Jog facility |
Optional remote jog facility for
connection to the PSMCC front panel. |
| PSMCC-MC |
Motor cable |
Optional 5m motor cable for connection
to the PSMCC. Includes connectors at each end. A further
matching connector is supplied for attaching to the motor. |
| PSMCC-OC |
Output cable |
Optional 5m output cable with a 9 pin
'D' type connector for PSMCC connection. Terminating with a flying for
user output wiring. |
| PSMCC-IC |
Input cable |
Optional 5m Input cable with a 9 pin
'D' type connector for PSMCC connection. Terminating with a flying
lead for user input wiring. |
| PSMCC-COMM |
Communications cable |
1.5m cable terminating with two 9 pin
'D' type connectors to interface between PSMCC2 and other PSMCC
terminals. |
| PSMCC-PC |
PC cable |
3m PC cable terminating with two 9 pin
'D' type connectors to interface between the PSMCC1 or PSMCC2 PC
terminal. |
| PSMCC-INT |
Interlock cable |
350mm Interlock cable terminating with
two 9 pin 'D' type connectors to interface between the PSMCC terminals. |
