XY64/35- MultiBase XY stage specifications
The above photograph shows the manually actuated XY64/35 MultiBase.  Part numbers for this series begin with XY64/35- and terminate with either an 'H' for manual handwheel actuation or 'IS' for the stepper motor driven configuration.  This photograph shows the XY64/35-H manually actuated MultiBase providing +/-14mm X or Y motion, fitted with a stepper motor driven linear shift mechanism to provide 250mm Z motion together with an MD25 MagiDrive to provide continuous rotation.

General Specifications
Criteria / Part Number XY 64/35-H XY 64/35-IS
Travelling flange 70mm (2.75”) OD CFNW35 with M6 straddled holes
Fixed system mounting flange 114mm (4.5”) OD CFNW64 with M8 straddled holes
Maximum X or Y travel +/-14.1mm vector
Bellows Bore 51mm
Clear Bore 38mm
Flange face to flange face 135mm
Drive mechanism Precision stainless steel leadscrew
X or Y resolution 0.01mm 0.0005mm
X or Y accuracy +/-0.01mm
Compression strain due to 1 atmosphere <0.2mm
Applied load horizontally mounted 10Nm
Applied load vertically mounted 50N
Angular deflection due to applied load <0.1°
Actuator Micrometer handwheel 
and positive or negative displacement scale		 Stepper motor and 
combined gearbox
Maximum bakeout 250°C 250°C with motor removed
Dimensional Drawings Click here to view Click here to view

Return to MultiBase XY manipulators